Step 1: Print Your Design
Print your design using sublimation film.
Sublimation Setting Guide
Find the right settings for your sublimation blanks.
How to Customize it by 3D Sublimation Oven Kit?
Step 2: Place the Film
Place the sublimation film over the product.
Step 3: Start Heat Transfer Printing
Start heat transfer printing using a sublimation oven.
Step 4: Peel Off
Peel off the sublimation film carefully.
3D Sublimation Blanks Printing Parameters
3D Phone Cases
302°F, 8 Mins
3D Earphone Cases
302°F, 8 Mins
3D Shin Guards
302°F, 8 Mins
Photo Slate
356°F, 13 Mins
Ceramic Ornaments
356°F, 5 Mins
Plate
356°F, 10 Mins
Ceramic Jewelry Tray
356°F, 10 Mins
Stainless Steel Jewelry Tray
356°F, 5 Mins
Tip 1 - 3D Phone Cases, 3D Earphone Cases, 3D Shin Guards
Film Preheat for 12 seconds, need use the sublimation film for printing designs, and need use mold for printing.
Tip 2 - Ceramic Ornaments
Print both sides at once
How to Customize it by Tumbler Heat Press?
1. Print Designs
2. Add on the Sublimation Mugs
3. Add Binder Clip
4. Shrink it by Heat Blower
5. Start Printing by Sublimation Oven
6. Hot Peel Off it
Tumbler Heat Press Printing Parameters
Ceramic
356°F, 280 Seconds
Please printing 2 pieces together For long-term printing, please use 11oz heater.
Ceramic
356°F, 280 Seconds
Please printing 2 pieces together For long-term printing, please use 11oz heater.
Stainless Steel
356°F, 50 Seconds
If the full wrap designs, please rotate it and print again.
Glass
356°F, 120 Seconds
If the full wrap designs, please rotate it and print again.
How to Customize it by Sublimation Oven?
1. Print Designs
2. Fix Designs on the Mug
3. Start Printing
4. Got it
Printing Parameters by Sublimation Oven
Ceramic
356°F, 12 Mins for 1 piece 356°F, 15 Mins for 4 pieces
Ceramic
356°F, 12 Mins for 1 piece 356°F, 15 Mins for 4 pieces
Stainless Steel
356°F, 6 Mins for 1 piece 356°F, 8 Mins for 4 pieces
Glass
356°F, 9 Mins for 1 piece 356°F, 16 Mins for 4 pieces
How to Customize it by Heat Press?
1. Print Sublimation Design
2. Fix Sublimation Design
3. Start Heat Press Printing
4. Finished Sublimation Photo Frame
5. Install Wooden Base
Printing Parameters by Heat Press
Ceramic Sublimation Blank
374°F, 120 Seconds
Print one side first, then flip it for printing another side.
Glass Sublimation Blank
356°F, 120 Seconds
Please do not mirror the print design, frosted back side for printing.
Acrylic Sublimation Blank
356°F, 120 Seconds
Please do not mirror the print design, white back side for printing.
Acrylic Sublimation Blank
356°F, 60 Seconds
Please do not mirror the print design, white back side for printing.
Glass Sublimation Blank
374°F, 180 Seconds
Please do not mirror the print design, white back side for printing.
Photo Slate Sublimation Blank
374°F, 480 Seconds
The print side should face down for printing.
Aluminum Sublimation Blank
356°F, 50 Seconds
Wood Bamboo Sublimation Blank
356°F, 120 Seconds
Pro Tips
Always test a small area first.
Ensure even pressure across the entire surface.
Use high-quality materials for best results.
Allow 24 hours before washing.
Use heat-resistant tape to keep transfers in place.
Check time and temperature before each material.